Manufacturer of High Quality Fittings
Newtech is Authorized Agent for Internationally well established fitting manufacturers. We import, stock & provide the fittings (Compression and Butt Fusion) to our customers as & when required by then. We are committed to facilitate our customers at every step, so we maintain the stock for complete range of fitting generally used by our customers.
PE Compression Fittings:
Compression fittings are available in which, pipes ends are inserted and tightened by threaded cap. These fittings provide a quick/easy leak proof assembly system for 20mm to 110mm pipe networks. In this case, except pipe cutter no other tools are required to install the fittings. Compression fittings are specially recommended for areas without electricity where butt fusion is difficult and for temporary piping systems. It is not recommended for gas or hot water piping system.
Butt Fusion Fittings:
In this method, pipes are welded with the help of a butt fusion machine in which first pipes end are faced, heated and compressed to yield a strong joint. Butt fusion fittings are available for a wide range of angles. Fittings are available with various combinations of end preparations i.e. flange or butt fusion. In Butt Fusion, HDPE pipe can be heat fused together to form a joint that is as or stronger than the pipe itself and is leak free. This eliminates the potential leak points every 10-20 feet as found with PVC and Ductile Iron bell and spigot connections. The Life Cycle Cost of HDPE pipe differs from other pipe materials because the “allowable water leakage” is zero rather than typical leakage rates of 10 to 20% for PVC and Ductile Iron. HDPE pipe fused joints are self-restraining and costly thrust restraints or thrust blocks are not required. HDPE pipe’s fused joints simply do not leak, eliminating infiltration and exfiltration problems experienced with alternate pipe joints.